Disassemble iPad 2 Wifi

This process isn’t that very hard compared to other tablets repairs, but you still need to be careful on taking apart iPad 2 if you have ever done an iPad disassembly yourself, as there are some differences.

Now i teach you how to Disassemble iPad 2 Wifi through from start to finish.

First. You’ll need some special tools so as to take apart your iPad Air, including the professional screwdrivers.

* Hair Dryer

* Suction Cup

* Triangle Case Opening Tool

* Plastic Pry Tool

* Tweezers

* Screw Driver

* Metal Pry Tool

1. Now, Power the iPad off and Use hair dryer to warm the iPad digitizer for about five minutes to loose the adhesive

2. Gently gash a gap between the digitizer and the rest of the device with the metal pry tool

3. Press the suction cup on the digitizer around and Pull up on the suction cup gently to wedge the triangle case opening tool

4. Lift the digitizer up gently and Undo the four screws on the four corners with screwdriver

5. Once the screws are removed, use suction cup to pull the LCD up gently and Use screwdriver to undo the three screws holding the shield

6. Use plastic prying tool to disconnect the LCD connector. Now the LCD screen is free. Remove the digitizer by disconnecting the two connectors

7. Use tweezers to peel off the black tape to disconnect one connector under there and Undo ten screws to remove the Bluetooth antenna (long one) and Wi-Fi antenna (short one)